Aluminum doors and windows equipment because of the rise of aluminum alloy doors and windows in the industry, for this equipment does not master the relevant knowledge is difficult to operate. Today, I'd like to share with you the correct way to use it!
1、 Gas source problem. Because the pressure materials of the bridge breaking aluminum doors and windows equipment are compressed by cylinders, it is the premise to ensure sufficient air supply.
2、 Relevant equipment. Because there are many types of equipment for aluminum bridge break doors and windows, there may be several types of each equipment. Especially, it is important to check the door and equipment, such as the gas pipe plug of the cutter, the speed of the saw blade in and out, and the working state of the saw blade.
3、 The knife cannot be too fierce. The hand wheel must be pulled out on the workbench when the self-propelled knife is taken. It is not allowed to change the speed of the feed. The restricted stop should be adjusted first.
4、 When removing the end milling cutter, the table surface should be padded with a backing plate, and the cutter head cannot be supported by hand. It is forbidden to blow iron chips directly by hand or mouth. If there is abnormal phenomenon, stop immediately and ask the relevant personnel to check.
5、 In power, because the voltage of bridge breaking aluminum doors and windows equipment is 380V generally, we must pay attention to the connection between the fire line and the zero line when wiring.
6、 The cutting center, cutting head and cutter hand shall not be close to the milling surface, and the cutter must be removed during cutting. Do not use cotton yarn to contact or rub the rotating tool and transmission part of the machine tool, nor transfer or remove tools and other items through the rotating part of the machine tool.
Different manufacturers produce different aluminum doors and windows equipment, but the actual quality is important, hope you don't be led by the nose at low price, if there are problems, we can consult!
